Orbit determination of space objects based on sparse optical data

Abstract: While building up a catalog of Earth orbiting objects, if the available optical observations are sparse, not deliberate follow ups of specific objects, no orbit determination is possible without previous correlation of observations obtained at different times. This correlation step is the most computationally intensive, and becomes more and more difficult as the number of objects to be discovered increases. In this paper we tested two different algorithms (and the related prototype software) recently developed to solve the correlation problem for objects in geostationary orbit (GEO), including the accurate orbit determination by full least squares solutions with all six orbital elements. Because of the presence in the GEO region of a significant subpopulation of high area to mass objects, strongly affected by non-gravitational perturbations, it was actually necessary to solve also for dynamical parameters describing these effects, that is to fit between 6 and 8 free parameters for each orbit. The validation was based upon a set of real data, acquired from the ESA Space Debris Telescope (ESASDT) at the Teide observatory (Canary Islands). We proved that it is possible to assemble a set of sparse observations into a set of objects with orbits, starting from a sparse time distribution of observations, which would be compatible with a survey capable of covering the region of interest in the sky just once per night. This could result in a significant reduction of the requirements for a future telescope network, with respect to what would have been required with the previously known algorithm for correlation and orbit determination.