Effect of doping on performance of organic solar cells

Abstract: Conventional models of planar and bulk heterojunction organic solar cells have been extended by introducing doping in the active layer. We have studied the performance of organic solar cells as a function of dopant concentration. For bulk heterojunction cells, the modeling shows that for the most studied material pair (poly-3-hexylthiophene, P3HT, and phenyl-C61-butyric acid methyl ester, PCBM) doping decreases the short-circuit current density (JSC), fill factor (FF) and efficiency. However, if bulk heterojunction cells are not optimized, namely, at low charge carrier mobilities, unbalanced mobilities or non-ohmic contacts, the efficiency can be increased by doping. For planar heterojunction cells, the modeling shows that if the acceptor layer is n doped, and the donor layer is p doped, the open-circuit voltage, JSC, FF and hence the efficiency can be increased by doping. Inversely, when the acceptor is p doped, and the donor is n doped; FF decreases rapidly with increasing dopant concentrations so that the current-voltage curve becomes S shaped. We also show that the detrimental effect of nonohmic contacts on the performance of the planar heterojunction cell can be strongly weakened by doping.