Sensor-Movement-Robust Angle Estimation for 3-DoF Lower Limb Joints Without Calibration

Abstract: Inertial measurement unit (IMU)-based 3-DoF angle estimation methods for lower limb joints have been studied for decades, however the calibration motions and/or careful sensor placement are still necessary due to challenges of real-time application. This study proposes a novel sensormovement-robust 3-DoF method for lower-limb joint angle estimation without calibration. A realtime optimization process, which is based on a feedback iteration progress to identify three joint axes of a 3-DoF joint, has been presented with a reference frame calibration algorithm, and a safe-guarded strategy is proposed to detect and compensate for the errors caused by sensor movements. The experimental results obtained from a 3-DoF gimbal and ten healthy subjects demonstrate a promising performance on 3-DoF angle estimation. Specially, the experiments on ten subjects are performed with three gait modes and a 2-min level walking. The root mean square error is below 2 deg for level walking and 5 deg for other two gait modes. The result of 2-min level walking shows our algorithms stability under long run. The robustness against sensor movement are demonstrated through data from multiple sets of IMUs. In addition, results from the 3-DoF gimbal indicate that the accuracy of 3-DoF angle estimation could be improved by 84.9% with our reference frame calibration algorithm. In conclusion, our study proposes and validates a sensor-movement-robust 3-DoF angle estimation for lowerlimb joints based on IMU. To the best of our knowledge, our approach is the first experimental implementation of IMUbased 3-DoF angle estimation for lower-limb joints without calibration.