The influence of beam focus during laser powder bed fusion of a high reflectivity aluminium alloy -- AlSi$_{10}$Mg

Abstract: LPBF of Al alloys is associated with numerous challenges when compared to other commonly used alloys due to their higher reflectivity and thermal conductivity. In this work, processing diagrams, temperature prediction models, XCT, and metallography are used for establishing criteria in process parameter optimization of high reflectivity Al alloys based on AlSi${10}$Mg response in using 57 different process parameter combinations - 21 using a focused Gaussian laser beam and 36 using divergent beams. For LPBF systems with focused beam diameters <100 {\mu}m, divergent beams obtained by defocusing to a position above the LPBF build plate primarily lead to conduction mode melt pools, while a focused beam leads to transition and keyhole mode melt pools. Conduction mode melting helps in avoiding keyhole mode defects, resulting in parts with densities >99.98%. Additionally, an analytical model-guided selection of laser power and velocity settings for a focused beam help in stabilizing melt pool and spatter dynamics in the transition melting mode thereby enabling a potential to obtain density values close to conduction mode densities (~99.98%). A dimensionless keyhole number (Ke) was derived in this work to identify distinct regions of conduction (Ke of 0-12), transition (Ke of 12-20), and keyhole (Ke > 20) mode melting during LPBF of AlSi${10}$. A melt pool aspect ratio (ratio of melt pool depth to width) of ~0.4 is observed to be the threshold between conduction and transition/keyhole mode melt pools for AlSi$_{10}$, different from the conventionally assumed 0.5. Lastly, inferred laser absorptivity values (from experimental melt pools) of transition/keyhole mode melt pools are observed to be >40% higher when compared to conduction mode melt pools. This work demonstrates a dimensionless-process map method to obtain near fully dense parts that can be generalized for LPBF of high reflectivity alloys.