Papers
Topics
Authors
Recent
Search
2000 character limit reached

Real-Time Electromagnetic Estimation for Reluctance Actuators

Published 24 Jan 2024 in eess.SY and cs.SY | (2402.00050v1)

Abstract: Several modeling, estimation, and control strategies have been recently presented for simple reluctance devices like solenoid valves and electromagnetic switches. In this paper, we present a new algorithm to online estimate the flux linkage and the electrical time-variant parameters of these devices, namely the resistance and the inductance, only by making use of discrete-time measurements of voltage and current. The algorithm, which is robust against measurement noise, is able to deal with temperature variations of the device and provides accurate estimations during the motion of the armature. Additionally, an integral {estimator} that uses the start of each operation of the actuator as reset condition has been also implemented for comparative purposes. The performances of both estimation methods are studied and compared by means of simulations and experimental tests, and the benefits of our proposal are emphasized. Possible uses of the estimates and further modeling developments are also described and discussed.

Definition Search Book Streamline Icon: https://streamlinehq.com
References (18)
  1. X. Zhao, L. Li, J. Song, C. Li, and X. Gao, “Linear control of switching valve in vehicle hydraulic control unit based on sensorless solenoid position estimation,” IEEE Trans. Ind. Electron., vol. 63, no. 7, pp. 4073–4085, Jul. 2016.
  2. T. C. Beh, M. Kato, T. Imura, S. Oh, and Y. Hori, “Automated impedance matching system for robust wireless power transfer via magnetic resonance coupling,” IEEE Trans. Ind. Electron., vol. 60, no. 9, pp. 3689–3698, Sep. 2013.
  3. S. Haghbin, S. Lundmark, M. Alaküla, and O. Carlson, “Grid-connected integrated battery chargers in vehicle applications: Review and new solution,” IEEE Trans. Ind. Electron., vol. 60, no. 2, pp. 459–473, Feb. 2013.
  4. P. Sharma, S. P. Duttagupta, and V. Agarwal, “A novel approach for maximum power tracking from curved thin-film solar photovoltaic arrays under changing environmental conditions,” IEEE Trans. Ind. Appl., vol. 50, no. 6, pp. 4142–4151, Nov. 2014.
  5. A. di Gaeta, L. Glielmo, V. Giglio, and G. Police, “Modeling of an electromechanical engine valve actuator based on a hybrid analytical–fem approach,” IEEE/ASME Trans. Mechatronics, vol. 13, no. 6, pp. 625–637, Dec. 2008.
  6. E. Ramirez-Laboreo, C. Sagues, and S. Llorente, “A new model of electromechanical relays for predicting the motion and electromagnetic dynamics,” IEEE Trans. Ind. Appl., vol. 52, no. 3, pp. 2545–2553, May/Jun. 2016.
  7. P. M. dos Santos Dias de Moraes and A. J. Perin, “An electronic control unit for reducing contact bounce in electromagnetic contactors,” IEEE Trans. Ind. Electron., vol. 55, no. 2, pp. 861–870, Feb. 2008.
  8. Y. P. Yang, J. J. Liu, D. H. Ye, Y. R. Chen, and P. H. Lu, “Multiobjective optimal design and soft landing control of an electromagnetic valve actuator for a camless engine,” IEEE/ASME Trans. Mechatronics, vol. 18, no. 3, pp. 963–972, Jun. 2013.
  9. J. Tsai, C. R. Koch, and M. Saif, “Cycle adaptive feedforward approach controllers for an electromagnetic valve actuator,” IEEE Trans. Control Syst. Technol., vol. 20, no. 3, pp. 738–746, May. 2012.
  10. E. Ramirez-Laboreo, C. Sagues, and S. Llorente, “A new run-to-run approach for reducing contact bounce in electromagnetic switches,” IEEE Trans. Ind. Electron., vol. 64, no. 1, pp. 535–543, Jan. 2017.
  11. A. García Espinosa, J. R. Riba Ruiz, J. Cusidó, and X. Alabern Morera, “Sensorless control and fault diagnosis of electromechanical contactors,” IEEE Trans. Ind. Electron., vol. 55, no. 10, pp. 3742–3750, Oct. 2008.
  12. N. Vaughan and J. Gamble, “The modeling and simulation of a proportional solenoid valve,” J. Dyn. Syst. Meas. Control, vol. 118, pp. 120–125, Mar. 1996.
  13. R. E. Kalman, “A new approach to linear filtering and prediction problems,” J. Basic Eng., vol. 82, no. 1, pp. 35–45, Mar. 1960.
  14. I. MacKenzie and D. L. Trumper, “Real-time hysteresis modeling of a reluctance actuator using a sheared-hysteresis-model observer,” IEEE/ASME Trans. Mechatronics, vol. 21, no. 1, pp. 4–16, Feb. 2016.
  15. D. B. Roemer, M. M. Bech, P. Johansen, and H. C. Pedersen, “Optimum design of a moving coil actuator for fast-switching valves in digital hydraulic pumps and motors,” IEEE/ASME Trans. Mechatronics, vol. 20, no. 6, pp. 2761–2770, Dec. 2015.
  16. B. D. O. Anderson and J. B. Moore, “Detectability and stabilizability of time-varying discrete-time linear systems,” SIAM J. Control Optim., vol. 19, no. 1, pp. 20–32, Jan. 1981.
  17. N. H. Vrijsen, J. W. Jansen, and E. A. Lomonova, “Prediction of magnetic hysteresis in the force of a prebiased e-core reluctance actuator,” IEEE Trans. Ind. Appl., vol. 50, no. 4, pp. 2476–2484, Jul. 2014.
  18. T. Braun, F. Straußberger, J. Reuter, and G. Preissler, “A semilinear distributed parameter approach for solenoid valve control including saturation effects,” in Proc. Amer. Control Conf., pp. 2600–2605, Jul. 2015.
Citations (16)
View on Semantic Scholar

Summary

No one has generated a summary of this paper yet.

Sign Up to Summarize

Paper to Video (Beta)

No one has generated a video about this paper yet.

Sign Up to Generate All Videos Subscribe on YouTube

Whiteboard

No one has generated a whiteboard explanation for this paper yet.

Sign Up to Generate

Open Problems

We haven't generated a list of open problems mentioned in this paper yet.

Generate Now

Continue Learning

We haven't generated follow-up questions for this paper yet.

Generate Now

Collections

Sign up for free to add this paper to one or more collections.

Sign Up