An Internal Digital Image Correlation Technique for High-Strain Rate Dynamic Experiments

Abstract: Background: Full-field, quantitative visualization techniques, such as digital image correlation (DIC), have unlocked vast opportunities for experimental mechanics. However, DIC has traditionally been a surface measurement technique, and has not been extended to perform measurements on the interior of specimens for dynamic, full-scale laboratory experiments. This restricts the use of DIC measurements, especially in the context of heterogeneous materials. Objective: The focus of this study is to develop a method for performing internal DIC measurements in dynamic experiments. The aim is to demonstrate its feasibility and accuracy across a range of stresses (up to 650MPa), strain rates ($10^3$-$10^6$ s$^{-1}$), and high-strain rate loading conditions (e.g., ramped and shock wave loading). Methods: Internal DIC is developed based on the concept of applying a speckle pattern at an inner-plane of a transparent specimen. The high-speed imaging configuration is then focused on the internal speckle pattern. During the dynamic experiment, in-plane, two-dimensional deformations are measured via correlation of the internal speckle pattern. Results: The internal DIC experimental technique is successfully demonstrated in both the SHPB and plate impact experiments. In the SHPB setting, the accuracy of the technique is excellent throughout the deformation regime, with measurement noise of approximately 0.2% strain. For plate impact experiments, the technique performs well, with error and measurement noise of 1% strain. Conclusion: The internal DIC technique has been developed and demonstrated to work well for full-scale dynamic high-strain rate and shock laboratory experiments, and the accuracy is quantified. The technique can aid in investigating the physics and mechanics of the dynamic behavior of materials, including local deformation fields around dynamically loaded material heterogeneities.